Kako radi ovaj motor?
You can run this motor on 300 to 1,000 volts dc (using a special coil design).
You can make the outer shell case out of just about anything you want to. But we suggest you use steel tubing or aluminum tubing for anything over 100 hp. Anything below that you can use ½”plywood box. What most of our customers use is green 1/4” x 14” diameter PVC sewer pipe.
4-Pole design. All magnets in the 12:00 and 6:00 positions fire st the same time, pushing apart with great force, to cause the Rotor shaft to turn, This motor can be ran in forward or reverse. This is our first prototype model and can be scaled up or down to any desired Hp you like. Of course one can improve on this design, see our #362- RC plans.
We made it simple in design for those who are not educated in the art of Electric Motor building and repair. It is a good idea to study a simple Science fair DC Motor etc... To get a basic understanding of DC Motor designs. A good source is your local Library.
All HV electromagnets are wired North Pole to North Pole. They can also be wired and timed to attracted each other if you wish to make an attraction motor.
You will be using 2 - 4 spark plugs as high voltage switches, To send a DC high voltage to 4 coils at a time. You can design this engine any way you want or any shape you want, just as long as you keep to the main working principle. The motor can be as deep as you want to design it. If make the magnets or your air core magnets about 4 to 6” long, it will be much easier to turn on a slow rpm drill press. I find that wrapping the coil with #31 wire at about 150 rpms works best, 250 rpms is a little fast but can be done. We strongly suggest you first build a one Hp or less DC fuelless motor first.
In our early days of testing, we made many different types of magnet coils to run our small test motor, we left no stone unturned, we found out real fast which size wire was an amperage hog and which one proved worthy enough to be used in our free energy motor. We found that the #36 fine hair wire was the best but harder to work with. #30 copper coated wire will work, but #36 is better using thousands of winds, High Voltage and a PVC plastic Air core bobbin type coil.
This Engine Motor Generator is just a basic industrial HV DC electric motor that can be Scaled up or down to any power rating that you desire. But the special part about this motor/engine is it is free energy! Keep all electromagnets firing north to north. Permanent magnets can be used on the rotor instead of electromagnets, which is easier to build and eliminates the need for brushes. If using permanent rotor magnets you will need to make the motor attract.
HOW IT WORKS; THE FUEL-LESS ENGINE puts out far more than it takes to run it!
It is considered a Free Energy Perpetual motion machine. It uses high voltage AC at 60 kHz ( 300 to 1,000 volts ) in the milliamps. The high voltage is then converted into DC (direct current) through the use of diodes which are rated at twice the voltage of the input voltage. Then the HV dc is directed to a HV CAPACITOR BANK, See page 1. Without the invention of the capacitor this engine would not be possible, High voltage in the milliamps can do nothing to a HV electromagnet with out the capacitors. The capacitors quickly store the electrons and so produce a great output of free amperage... There is something else that we found
that happens that we can not explain,.. something extra is produced by the high voltage that causes this engine to work ?
So then the electrolytic capacitor bank is now fully charged and the spark plug gap is set to fire at 1,000 volts, It then ignites and a complete circuit is made to the magnets which are facing one another north pole to north pole, An explosive amount of magnetic power then takes place and both magnets repel one another, You can use that power to do work, to power a generator to keep up the batteries and to supply power to your entire home...
You know the first time I tried this I was skeptical, I started out using just
two electro magnets that I made myself, We placed them on the table and I held down the top magnet just in case it did work. I didn't want my magnet to get damaged. So with all I could, I held and pressed down on the magnet with one hand and connected the + wire lead to the 12 volt battery, then POW! It ignited and almost broke my arm off, and I still couldn't keep the magnet from flying thru the air. That's an experiment that I will never forget.
NOTE: The more voltage you use the more power your engine (Motor) will have, as well as rpms. But anything over 1,600 volts will have to be well insulated. Your soft iron cores of your electro magnets will have to be dipped in paint and allowed to drip dry for 3 days. Or you can simply buy a 10 LB roll of #30 or so double or triple coated copper wire.... also buy the square type you will get more power.... and be sure to wrap wire as tight as you can, side by side as close as you can...
-------------------------------------------------------------------------------
Ima još toga... neću sad sve ovdje kopirati...
Prijava
FAQ
Pretraživač
